Bowman Sectional Track System

- BSTS track sections are 4 lane, sectional pieces of track that can be set-up and torn down much
  like standard HO track (Tomy, Tyco, Mattel, Life-Like).

- BSTS track sections are designed to connect together via my "bowtie" system.

- BSTS track sections also incorporate my "tongue and groove" joints for smooth transitions.

- BSTS track sections come with Tomy sized rail for "Full magnetic downforce" effect.

- BSTS track sections utilize the exact same 3" geometry standard that Aurora developed
  and 1½" lane spacing that Tyco used.  So duplicating your existing circuit should be NO problem.

- BSTS track sections can be programmed into Ultimate Racer 3.0 utilizing 4 lane AFX or Tomy track.
  So you can design your track using that software.  Visit http://www.uracerweb.org/ for more info.

- If you design a track in Ultimate Racer , then just send me the file, and I'll know exactly
  what track sections you'll need.

- Each and every section of BSTS track has the capability of being wired up for a power tap!
  So no "power terminal section" is needed and you can incorporate as many "jumpers" as you
  you have track sections (if you like). No soldering necessary.

- BSTS track sections have an added extra inch on each edge of the roadway (the apron)
  to allow the cars to get sideways without falling off of the track.

- BSTS corner choices are vast.   Starting at what you'd know as a 6"/ 9" combo
  (we call a 10" because of the added 1" apron), in 1½" increments all the way up
  to a 31" radius corner!

- BSTS straights come in many choices too.
  In 3" increments starting at 3" and going all the way up to 48"!

  Here's a design done with Tracker 2000:

Please note:  Tracker 2000 only shows two lanes, but Bowman Sectional Track Systems are 4 lanes wide!

Have questions?  email me at: bradstracks@gmail.com

Here's the pricing for BSTS track sections: Prices coming soon!

CLICK HERE to go back to my HOME page
CLICK HERE to go to my "track info" page